This post aims to help healthcare providers to gain a basic understanding of LOLER tests and requirements within the healthcare industry.
LOLER regulations (Lifting Operations and Lifting Equipment Requirements, 1998) aim to ensure that all lifting equipment and lifting accessories in the workplace are used in a safe and appropriate manner.
The regulations state that all lifting equipment should have suitable strength and stability for its designed use. LOLER also states that the Safe Working Load (SWL) and maintenance dates must be clearly visible on the equipment and any faults are reported immediately.
LOLER is implemented to prevent the risk of injuries or fatalities which may occur from the use of lifting equipment within the workplace.
When deciding whether LOLER applies to you, you need to ask yourself two questions. Firstly, is it work equipment and secondly, is it lifting equipment.
Owning a piece of lifting equipment doesn’t automatically mean that it requires LOLER testing. The equipment has to be specified as ‘work equipment’ for LOLER to be applied.
“The equipment has to be defined as ‘work equipment’, which is defined in the Provision and Use of Work Equipment Regulations 1998 (PUWER) as ‘any machinery appliance, apparatus, tool or installation for use at work (whether excusively or not)’. (HSIS4)
Any lifting equipment used by an employee in the workplace, including the healthcare industry, will be covered by LOLER. In the healthcare sector, the main exemptions where LOLER doesn’t apply are:
LOLER will not be applied in these circumstances as they are not defined as ‘work equipment’. However, lifting equipment that has been loaned will still have to comply with the Health and Safety At Work Act 1974 section 3 (to provide safe equipment and maintain it, so far as is reasonably practicable).
Lifting equipment is defined as equipment which lifts or lowers loads as a principle function. So any equipment in the healthcare sector that is primarily used to lift a person requires LOLER tests. A lot of equipment in the healthcare industry has the ability to lift a person as well as its normal operational functions i.e. beds, trolleys. This equipment does not require a LOLER test because its sole purpose isn’t lifting or lowering a person. However, if such equipment is used at work, the provisions of PUWER will still apply.
“Height adjustablility alone does not mean that LOLER applies to the equipment.” (HSIS4)
A ceiling or mobile hoist, however, is exclusively used to lift a person and support their weight. Therefore this equipment would require LOLER inspections. Here are some examples of lifting equipment which requires testing under LOLER.
LOLER regulations impose a duty on owners of lifting equipment, business owners and employers to ensure that all lifting equipment is suitable and stable for its proposed use. This includes regular inspections and maintenance checks under LOLER & PUWER.
“These Regulations (LOLER) place duties on people and companies who own, operate or have control over lifting equipment. This includes all businesses and organisations whose employees use lifting equipment, whether owned by them or not.” (HSIS4)
A qualified person, who has enough practical and technical knowledge and experience of lifting equipment, is able to conduct a thorough LOLER test and decide the result. The trained examiner will have the ability to determine whether equipment is corroding or deteriorating. When conducting the test, the examiner will check the following:
A detailed version of LOLER test requirements can be found here.
Before any lifting equipment is used for the first time you will need to guarantee, with physical evidence, that the equipment has had a thorough examination and is safe to use. If you are unable to obtain this information, the equipment should not be used before being tested.
Periodic examinations are required if the lifting equipment is exposed to conditions which can cause deterioration or result in fatal/serious injury. By LOLER regulations, the following intervals should be observed depending on the equipment and its purpose use.
Thorough LOLER tests should be conducted at least every 6 months on all lifting equipment and any accessories. It is advised that daily routine checks are carried out before any lifting equipment is used. Any faults or defects should be reported immediately and the equipment shouldn’t be used until a specialist has conducted a thorough inspection.
Further reading:
To find out more on LOLER examinations, click here.
To find out more about LOLER regulations in the workplace, click here.
Progress House
Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley
LE10 3BS
Call us 024 7647 2600
[email protected]
© 2023 Multicare Medical Ltd - Registered in England and Wales No. 08565494.
Registered Office: Progress House, Jacknell Road, Dodwells Bridge Industrial Estate, Hinckley. LE10 3BS